杭州怎么找到 附近 服务-杭州怎么找到 附近 服务_首页

在江门酒店晚上怎么叫服务

Inorganic water repellent CS - Ⅱ

2019-07-09 15:37:40 five thousand two hundred and ninety-six
 Inorganic water repellent CS - Ⅱ Inorganic water repellent CS - Ⅱ
Classification: Engineering Series
Product overview: inorganic permeable hydrophobic agent CS - Ⅱ is suitable for cement concrete, roof, roof, internal and external walls, basement, toilet, pool, door and window corner, cement dike, tunnel bridge, cement pipe, gypsum, stone, reinforced cement products, etc.
[product use]
Spraying on the surface of buildings, sealing the internal pores, forming a water repellent layer, has the functions of anti-seepage and moisture-proof, anti mildew and alkali resistance, anti fouling and self-cleaning, overcomes the problem of short service life of existing similar products, and can replace silicone, silicone acrylic transparent waterproof adhesive and other products on the market.

[main ingredients]
Inorganic silicon, inorganic aluminum salt

[package]
20L barrel

[waterproof principle]
Spraying on the surface of the building to be waterproof can quickly penetrate into the base layer. After 12-24 hours of complete drying, a permeable waterproof layer is formed. The rainwater splashes on the surface of the building like dew drops on the lotus leaves, thus preventing the infiltration of rainwater.


[scope of application]
It is suitable for cement concrete, roof, roof, inner and outer wall, basement, toilet, pool, door and window corner, cement dike, tunnel bridge, cement pipeline, gypsum, stone, reinforced cement products, etc.


[applicable area]
Spray 2 M2 stock solution per kg (diluted as appropriate, subject to no white residue on the surface after drying)

[warranty period]
The crystal has the same service life as concrete, and its water repellency is more than ten years

[product features]

·It penetrates more than 5mm inside the base course and is wear-resistant;

·Spraying on the surface of the building does not affect the color structure of the building. It is resistant to high and low temperature (- 40 ℃ ~ 350 ℃) and aging resistance;

·Because it is inorganic material, it has good anti ultraviolet ability;

·Water based products, without benzene and other harmful carcinogens, green environmental protection.


[note]

·The construction surface must be clean and dry, and can not be sprayed in rainy days.

·During the construction, spray the base surface fully and absorb enough, and wait for 24 hours to see the water repellent effect.

·Before large-scale construction, spray a small area to see the effect. If the surface turns white after the construction is completed and dried, it indicates that the building has a high density, and a part of water can be added to dilute it. If it is not whitening, it can be used directly.

·In case of splashing on eyes or skin during construction, rinse with water.