成都足疗买钟出去是睡觉吗-成都足疗买钟出去是睡觉吗_第1页

在江门酒店晚上怎么叫服务

Anjuxin-3d lossless plugging agent

2019-07-09 15:37:40 five thousand two hundred and ninety-eight
 Anjuxin-3d lossless plugging agent Anjuxin-3d lossless plugging agent
Classification: home decoration series
Product overview: anjuxing-3d non-destructive plugging agent is suitable for non smashing brick treatment of leakage water from balcony and terrace, as well as grouting plugging for basement, elevator shaft, tunnel, subway, pool, toilet, etc., and can also be used as grouting material for reconstructed waterproof layer of roof.

[product use]
No need to smash brick, pour one bubble and sweep, easy plugging, save time, labor and money, DIY.

[main ingredients]
Component A is mainly composed of inorganic silicate and penetration agent;
Component B is mainly composed of calcium solution and crystallization AIDS.

[product features]
Inorganic materials, truly non-toxic environmental protection (with test report, different from water curing products), crystal UV resistant, stable and non shrinking, useful life more than 10 years.

[waterproof principle]
This product mainly uses the chemical reaction of a and B to generate stable and durable hydrated calcium silicate crystal (C-S-H) in the water seepage channel under the floor tile to block the water leakage, and has the function of secondary repair.

[scope of application]
This product is suitable for the water seepage (including the pipe root part) of the terrace and landscape pool which have been pasted with ceramic tiles

[package]
2 in 20L drum

[applicable area]
It can be soaked separately and grouted

[usage]
1、 Natural infiltration method
1. Cutting seam. Use cutting machine to cut the gap between floor tiles about 1 mm wide and more than 20 mm deep, and clean them up;
2. Construction component A. After diluting and mixing component A with 1 times of clear water, pour it on the construction base surface, sweep it from low to high for about 1 hour until the material at the gap of floor tile is saturated (the liquid level does not drop within 3 minutes). Remove the residual materials (prevent conjunctiva and pollute the appearance of floor tile surface) and clean up;
3. Air dry for 1 day. The water evaporation space under the floor tile is increased and the penetration of component B is promoted;
4. Construction component B. Pour the powder and liquid material of component B into the bucket respectively, add 2 times of water to dilute and mix evenly. Pour the adjusted component B onto the base surface of component A, and sweep it from low to high for about 1 hour until the material at the gap of floor tile is saturated (the liquid level will not drop within 3 minutes). Clean up residual materials (prevent conjunctiva and pollute the appearance of floor tile surface) and clean up;
5. Seal the gap. 3-24 hours after the construction of component B. Use the company's special materials to plug the gap and restore the beauty.
2、 Grouting method
1. Drilling grouting hole. Drill holes at appropriate parts of the balcony or terrace. The depth of the holes reaches the structural layer below the dry adhesive layer. Install and fix the grouting needles. The spacing between grouting holes is about 1 m, and holes can also be drilled according to the actual situation according to the position of grout gushing.
2. Mix component A. Open the package barrel of component A, dilute it with 1 times of water, and stir it evenly.
Component B. Open the packaging barrel of component B, take out the powder and liquid material in the bag, then pour the liquid material and appropriate amount of powder (the more powder is added, the shorter the curing time) into the barrel and mix them evenly. After that, pour water into the bucket until it is full and mix evenly.
4. Filter component B. The grouting machine is not blocked.