2019-05-01 15:22:01four thousand five hundred and forty
Acrylic grouting material completely replaces domestic polyurethane water-based, oil-based and epoxy resin grouting materials. This product is the best substitute for traditional grouting fluid and water curing. The product can stop water instantly and control the curing time for a few seconds to several minutes. It has good elasticity, and will not crack at minus 30 degrees. Its strength is 20-50 times that of water curing. It is not afraid of soaking in water.It is mainly used in tunnels, subway expansion joints, settlement joints, induced joints, cracks, post pouring belt, basement deformation joints, hollow brick walls, external wall cracks, water leakage, as long as there are cracks, all joints as long as pouring once, never twice, one step in place.Acrylic acid salt two-component plugging agent, no maintenance after plugging, will not let you repair again and again. The leakage place is easy to use, this product is environmentally friendly and non-toxic.
Acrylate plugging grouting material
① The viscosity of the slurry is small, and its viscosity is 2-6mpa. S, and it remains unchanged before solidification and cementation, so it has good permeability. Under the action of pressure, it can be poured into the leakage channel in reverse direction to fill the channel, and consolidate and block the leakage channel, so that the original leakage site will not leak again.
② The gel time can be accurately controlled in the range of tens of seconds to several minutes, and the consolidation occurs and completes in an instant. The penetration radius of slurry can be controlled under the joint action of pressure and gelation time.
③ The permeability coefficient of gel is 1.3 × 10-200px / s.
④ The gel is not eroded by bacteria, acid and alkali, and has strong durability and can be used for a long time.
⑤ The consolidation body has good elasticity, elongation at break is more than 100%, and it can expand when meeting water, which can prevent the fracture deformation and damage, and the adhesive surface leakage again.
⑥ The slurry and gel are basically non-toxic, and will not affect the health of construction personnel and pollute groundwater, so they are environmental protection products